Chicago screws?

[vaderswingman]

How has everyone mounted their octagons? I'm assuming with Chicago screws. If so what is the correct size screws to use and where is a good source to get them. Thanks for any help!

[Blackwatch]

head to your local mom and pop hardware store, and look for the "blue bins" or "hilman bins". Small stores have these, but the big stores tend to have a wide variety of stuff that makes NO sense....

anyhoo....get a chicago screw that will pass all the way through the armor, octagon, strap and any padding/velcro you have on any of the pieces.

they tend to be the same diameter, and a 1/2" unit should be more than enough.

[ptbenz]

http://www.amazon.com/gp/aw/d/B009OGE8H ... p_s_a_1_11" onclick="window.open(this.href);return false;

Detachment Leader via Tapatalk 4

[Firebat]

Tandy leather also has them I think

[HoseNose]

I managed to find some at Home Depot:

http://www.homedepot.ca/product/papc-8- ... pcs/955950" onclick="window.open(this.href);return false;


Sent from my very out dated iPhone using Tapatalk.

[vaderswingman]

Thanks a lot guys. Much appreciated!

[Sheriff]

Here is how I did mine: viewtopic.php?f=5&t=5978" onclick="window.open(this.href);return false;