Shoulder Strap Octogons
- smeddawg
- Member - 1st Air Cavalry
- Posts: 334
- Joined: 2013-01-26 15:01:24
- Name: Trey Smedley
- Garrison: Florida Garrison
- Location: Clermont, FL
- Contact:
-
Costume Level Award
Shoulder Strap Octogons
Does anyone have specific sizing on these, length, width etc. I'm going to have to cut some from some spare abs I have, but I need a baseline to start from. Thanks for the help.
-smeddawg
-smeddawg
-
- Detachment Officer - Retired
- Posts: 323
- Joined: 2012-02-12 19:08:06
- Name: Brad Lee
- Garrison: Carolina Garrison
- Location: Dillon, SC
- Contact:
-
Costume Level Award
Ace of Aces
Re: Shoulder Strap Octogons
No doubt someone who actually has armor in hand can give you more accurate measurements, but for reference the squares on the chestbox are 1". So looks like 3" and some change longways, and 2 1/2" wide, with around 1/3" on the cut corners, and about 1/8" thick.
That's based off of this:
http://www.jrsdetachment501st.org/images/armor1b.jpg
That's based off of this:
http://www.jrsdetachment501st.org/images/armor1b.jpg
JRS Web Administrator - Retired
Carolina Garrison GWL (2015)
Legion Webteam
- smeddawg
- Member - 1st Air Cavalry
- Posts: 334
- Joined: 2013-01-26 15:01:24
- Name: Trey Smedley
- Garrison: Florida Garrison
- Location: Clermont, FL
- Contact:
-
Costume Level Award
Re: Shoulder Strap Octogons
Thanks for the reply, that gives me something to start with, I'll rough some out of abs and go from there.
-
- Ace of Aces
- Posts: 441
- Joined: 2010-05-29 09:01:34
- Name: John Shrout
- Garrison: Bloodfin Garrison
- Location: Indianapolis, IN
- Contact:
-
Costume Level Award
Ace of Aces
Re: Shoulder Strap Octogons
I have my armor sitting out here in my bedroom. I'll measure one of my Octagons tomorrow and post the measurements here.
TI/IC-4673
19th Imperial Fighter Wing/Nighthawk Flight Founder
"Nighthawk 1"
"Live to Fly, Fly to Live, Aces High!!"
- Tie by Night
- 501st
- Posts: 86
- Joined: 2012-05-02 15:37:14
- Name: Matt Skinner
- Garrison: Florida Garrison
- Location: Clermont, Florida
- Contact:
Re: Shoulder Strap Octogons
If this helps, the Mon Cal ones I have are 4" long by 2 and 7/16ths" wide. I don't have any way to determine the angle of the cut so you'd have to make your best guess.
- smeddawg
- Member - 1st Air Cavalry
- Posts: 334
- Joined: 2013-01-26 15:01:24
- Name: Trey Smedley
- Garrison: Florida Garrison
- Location: Clermont, FL
- Contact:
-
Costume Level Award
Re: Shoulder Strap Octogons
Thats perfect, I can always go with a 45 degree on the ends at like 1/4 inch. I'll use some of that spare abs you hooked me up with and do a few tests this weekend. Thanks man.Tie by Night wrote:If this helps, the Mon Cal ones I have are 4" long by 2 and 7/16ths" wide. I don't have any way to determine the angle of the cut so you'd have to make your best guess.
-
- Ace of Aces
- Posts: 441
- Joined: 2010-05-29 09:01:34
- Name: John Shrout
- Garrison: Bloodfin Garrison
- Location: Indianapolis, IN
- Contact:
-
Costume Level Award
Ace of Aces
Re: Shoulder Strap Octogons
I didn't get mine measured today. Sorry about that. But, I have the same ones as Tie by Night.
TI/IC-4673
19th Imperial Fighter Wing/Nighthawk Flight Founder
"Nighthawk 1"
"Live to Fly, Fly to Live, Aces High!!"
- BOBA-TAFF
- 501st
- Posts: 74
- Joined: 2007-06-25 04:20:11
- Name: Jason
- Garrison: German Garrison
- Contact:
Re: Shoulder Strap Octogons
I do mine for my kits
8cm by 5.5cm and 30 degree cut in all 4 corners hope this helps
8cm by 5.5cm and 30 degree cut in all 4 corners hope this helps
- smeddawg
- Member - 1st Air Cavalry
- Posts: 334
- Joined: 2013-01-26 15:01:24
- Name: Trey Smedley
- Garrison: Florida Garrison
- Location: Clermont, FL
- Contact:
-
Costume Level Award
Re: Shoulder Strap Octogons
Thanks all for the replies, exactly the info I was looking for. You all rock!
-
- Ace of Aces
- Posts: 206
- Joined: 2013-03-28 07:20:53
- Name: Mickey Marek
- Garrison: United Kingdom Garrison
- Location: Bury, Lancashire
- Contact:
-
Costume Level Award
Ace of Aces
Re: Shoulder Strap Octogons
Hi guys,
Could someone take a closeup photo of there octagons please? I'm struggling to visualise the corner angles with the whole armour pictures
Cheers!
Could someone take a closeup photo of there octagons please? I'm struggling to visualise the corner angles with the whole armour pictures
Cheers!
-
- Ace of Aces
- Posts: 7002
- Joined: 2008-01-04 20:04:18
- Name: David D Campbell
- Garrison: Bast Alpha Garrison
- Location: Watson LA --Bast Alpha Garrison
- Has thanked: 2 times
- Contact:
-
Costume Level Award
Ace of Aces
Re: Shoulder Strap Octogons
Velker Actual
Regimental Sergeant Major, 6th Regiment, Tannerman Rifles, Royal Manticoran Marine Corps
Commander, Deep South Mothership, Visitor Fleet
Aliens Legacy Colonial Marine ID A09/TQ0.0.52128E1
Rule the sky, Rule the night
-
- 501st
- Posts: 16
- Joined: 2015-02-20 07:31:14
- Name: Eric
- Garrison: Alpine Garrison
- Location: Syracuse, Utah
- Contact:
Re: Shoulder Strap Octogons
I couldnt find where Mon Cal sells these? Would you happen to have a link? Thanks!